In the last lesson, we learned how to access the command line. In this lesson, we'll explore some of the most common commands we can use with Bash. We'll use many of these daily at Epicodus and also out in the industry.
To execute a command we just click within the terminal window and begin typing. Text is inserted where our cursor is located, directly after the prompt. After typing a command we press Enter to execute it.
In this lesson, we'll learn how to use the command line to do the following:
Before we get started, we need to navigate to the desktop. If you are using a Mac, type the following in the terminal and then press Enter. (Don't forget that you shouldn't type in the
$ - that's a symbol for the prompt itself, not the command you should type in!)
$ cd ~/Desktop
The command above moves us from the home directory to the desktop. We'll discuss this further shortly!
If you are a Windows user, right click on the desktop and click "Git Bash here", which will open a Git Bash screen on the Desktop. You are already in the desktop directory.
We can verify that we are on the desktop with the
$ pwd command, which prints your current location to the screen.
pwd stands for print working directory. A directory is the more formal term for what we normally call a folder. A directory can hold other files and directories.
We can use the command line to look around our computer just like we would with the Mac Finder or Windows Explore programs. The only difference is that we are using a text-based interface instead of a graphical user interface (GUI).
$ pwd to check your current directory. On Epicodus computers, we'll see the following (as long as we followed the above directions to navigate to the desktop).
pwd returns a file path like this:
A path is exactly what it sounds like - the path a user would take to get from the root directory of a machine to the directory that we are currently in. Note that the root directory is different from the home directory. The home directory has a lot of stuff - including our personal files - while the root directory contains everything on our machine - including our home directory.
In the example above, the
Desktop directory is inside the
Guest directory, which in turn is inside the
Users directory, which is in our root directory.
If you are using your personal computer, your results will vary. However, one thing should remain the same - we are all in the
Desktop directory at the moment, so the directory listed on the right side of the path should be
Desktop - the same for everyone.
When we open the Terminal application on a Mac or open Git Bash via Windows Explorer, we begin in the home directory by default. However, on our personal machines, the path from the home directory to the desktop can vary depending on the operating systems we use. That's why we ensured that we all started in the
If you are using the command line are you're ever unsure of exactly where you are, just run the
$ pwd command.
Before we learn to navigate through different directories, we're going to create several new directories. We can do so with the
$ mkdir command, which is short for make directory.
Type the following into the command line (and then press Enter):
$ mkdir coding-practice
This will create a directory called
coding-practice on your desktop. As we can see, the
$ mkdir command can't be run on its own - it needs to know the name of the directory that should be created. To do this, we put a space after
$ mkdir and then write the name of the directory we want to create. We also put a hypen between "coding" and "practice" - otherwise, the
$ mkdir command will create two directories, one named
coding and one named
practice. That's not what we want here! It is common convention for developers to use hypens or underscores for file names that have more than one word.
It may not seem very intuitive to create a directory this way at first, but most developers prefer this approach to the more cumbersome point and click interface of the GUI. For instance, if we wanted to create five new directories, we could do something like the following. (Don't actually run this command - it's just an example.)
$ mkdir coding1 coding2 coding3 coding4 coding5
That's much quicker than using the GUI to create five directories separately.
$ mkdir command will always create a directory in our current working directory. We know our current working directory is
Desktop because of the
pwd command. In fact, this is true of all Bash commands - they will be executed from the current working directory.
It often matters where a command is executed so pay close attention to your current directory. For instance, it's a common beginner mistake to accidentally create a new directory in the home directory, only to wonder why it's not showing up on the desktop.
Let's create one more directory for practice:
$ mkdir my-first-website
At this point, we should have at least two directories on our desktop. On your personal machine, you may have more... maybe even too many if your desktop tends to get overwhelmed with stuff!
$ ls command stands for list. Executing this command prompts the terminal to list out the directories ("directories" is just a technical term for folders) and files in our current location. Let's run the command now. There should be somewhere between two and too many directories, depending on the state of your personal machine. Let's imagine, though, that we have an absolutely pristine desktop (because we are so organized and ready to start coding). Running this command will look something like this:
epicodus-5:~ Guest$ ls coding-practice my-first-website
We see a list of the directories we just created. We can also list out the directories inside of one of these directories by including its name after the
$ ls command. Here's an example:
$ ls coding-practice
Note that no files or directories will show up, but that's expected - we haven't added anything to
We'll learn how to make files soon, but first let's see how we can navigate between directories.
$ cd stands for change directory. As the name implies, this command allows us to navigate to a different directory from the one we're currently located in. Just as with
$ mkdir, we can't run the
$ cd command on its own. In this case, the command line needs to know which directory it should move to.
Let's look at several ways to execute the
$ cd command:
$ cd directory-name
We can include the name of a directory we'd like to navigate to after the
cd command. For instance, if we want to move into the
coding-practice directory, we'd run the following command:
$ cd coding-practice
After we run
$ cd, no text is printed to the screen. This is normal. However, the prompt preceding the command line will change to reflect our new location. Instead of seeing something like
$ desktop, we'll see
$ coding-practice. We can verify our current directory with the
$ pwd command.
Remember the command that Mac users executed at the beginning of this lesson to get to the desktop?
$ cd ~/Desktop
In the example above, we used
$ cd to move to the directory on the right side of the path (
~ (tilde symbol) represents the home directory on a Mac (as well as Linux operating systems). We can always return to the home directory on a Mac or Linux operating system by typing
$ cd ~. We can then specify additional directories in the path to navigate elsewhere from the home directory. (Windows doesn't use the tilde symbol to represent the home directory, so Windows users won't be able to use this shortcut - unless you are using Git Bash, which does use the tilde symbol.)
In other words, as long as we know the correct path, we can get anywhere on our computer with one
$ cd command. For instance, to get to the
coding-practice directory from anywhere on a Mac machine, we'd just add
coding-practice to the command above:
$ cd ~/Desktop/coding-practice
While Windows users don't have the
~ shortcut, the same general idea applies. As long as we input the correct path, we can use a single
$ cd command to move through any number of directories.
$ cd is one of the most useful commands that you'll learn - and we will be using it all the time at Epicodus.
$ cd ..
Including two dots, like this
.., navigates to the directory one level above the current directory. If we are in the
$ cd .. will take us up one level to the
desktop directory. We could keep executing
$ cd .. until we reach our root directory - then we can't go any further.
If we wanted to go up two levels, we could do something like this:
$ cd ../..
As you might guess, we'd just add
/.. to the command to go up yet another level.
We've learned how to create directories already. Now it's time to learn how to create files. We can do so with the
$ touch command. Let's add a new file to the
my-first-website directory. Use the
$ cd command to get to that directory. If you are currently in the
coding-practice directory, we could get there by doing the following:
$ cd ../my-first-website
In the example above, we specify a relative path. This is different from an absolute path, where we'd start from the root directory. With a relative path, we just need to tell our machine how to get from our current directory, not all the way from the root directory.
Now let's create a new file:
$ touch index.html
Just like with
$ mkdir, we need to specify a name. In this case, it will be the name of the file we are creating. Don't forget to add extensions if needed. In the case above, we are creating an HTML file so we need the
.html extension. We will create many HTML files starting from our very first week of class. (
index.html is a very common naming convention for an HTML file.)
If you run
$ ls, you'll see our new file has been created:
$ ls index.html
$ mv command stands for move. It can both move and rename files. If we want to rename our
index.html file in
my-first-website, we'd do the following:
$ mv index.html my-first-webpage.html
As you can see, the
$ mv command requires two pieces of information. The first is the name of the file we'd like to rename or move. The second is the new name or location we'd like to provide the file. In the example above, we are renaming a file called
We can confirm the file has been successfully renamed by using
$ ls to list all files in the current location:
$ ls my-first-webpage.html
However, what if we want to move this file from the
my-first-website directory to the
coding-practice directory? Here's what we need to do:
$ mv my-first-webpage.html ../coding-practice/my-first-webpage.html
Here, we use the
$ mv command to move a file instead of renaming it. First, we provide the name of the file we'd like to move (
my-first-webpage.html). We don't need to specify a path because we are already in the directory where
my-first-webpage.html lives. Next, we provide the relative path to where we want the file to go. This tells our computer exactly where the file should go and what it should be named.
Note that we have to navigate up a directory with
.. in the command above. The
.. isn't just used with
$ cd. It's used with paths in general. There are many, many commands where we'll need to provide our machine with a path so it knows exactly what to do. Next, we specify our file should go into the
coding-practice directory. Finally, we specify that the file should still be named
my-first-webpage.html. If we wanted to, we could've also renamed the file in the process by doing something like this:
$ mv my-first-webpage.html ../coding-practice/index.html
This would've moved
my-first-webpage.html and renamed the file back to
If we run
$ ls again, we can see that
my-first-webpage.html is no longer listed:
my-first-website $ ls
Let's navigate back into the
$ cd ../coding-practice
Now if we run
$ ls again, we'll see our moved file:
epicodus-5:first-webpage Guest$ ls my-first-webpage.html
$ rm file-name
$ rm command stands for remove and it allows us to delete a specified file entirely. Warning: You must proceed with caution when you run
$ rm! This command does not move files to the trash, so there's no opportunity for second thoughts. Once you remove a file, it's gone and can't be retrieved.
my-first-webpage.html file is ready to be deleted - after all, it doesn't contain all of our favorite recipes or anything else. So let's zap it!
coding-practice $ rm my-first-webpage.html
We combine the
$ rm command with the name of the file we'd like to delete.
Did deleting a file feel a little risky? If so, take a deep breath... we can also use the
$ rm command to delete entire directories. Warning: As you may guess, this is potentially much riskier than just deleting a single file. For instance, if you were to specify that your root or home directory be deleted, it would destroy everything - and likely render your machine completely unusable.
Note that you cannot be located within a directory you are attempting to delete. That would be like wrapping yourself inside a present. If we want to delete the
coding-practice directory, we first need to navigate up and out of the directory. Assuming we are still in
coding-practice, start by typing:
$ cd ..
Now we can run
$ ls and confirm that the
coding-practice is still there. Let's zap this one, too!
epicodus-5:intro-to-programming Guest$ rm -r coding-practice
Note that we need to include the
-r flag. This says that directories should be recursively deleted. If we didn't add the
-r flag (and just used
$ rm), we'd get the following error:
rm: coding-practice: is a directory
That means we've forgotten the
Sometimes, Bash will complain about deleting a directory. You can override Bash and delete the directory with the
-f flag, which means force. In other words, we'd use
$ rm -rf. As you may guess, forcing something to be deleted can be risky. Bash may have good reasons for complaining!
If we run
$ ls again, we'll see that the
coding-practice directory is gone.
It should go without saying again, but will be said again anyway: always be careful deleting files and especially directories! They can't be recovered. They go into the great big emptied trash bin in the sky where things can't ever be recovered. Okay, it's not in the sky, nor is it an emptied trash bin, but you get the drift. Those files and directories are gone forever.
In this lesson, we've covered some basic but very powerful commands that we can run in the command line. You will be using many of these commands every day while you are a student at Epicodus - and hopefully in a long, fruitful career after you're done as a student.
Make sure to check out the cheat sheet tab of this lesson for terminology from this lesson and command line reference of most frequently used commands!
Path: The unique location of a file or folder in the file system hierarchy. Example:
Users/Andrea/Pictures/fun-day.jpg is the path for the image called
Directory: Another name for a folder in file system hierarchy. Example:
Users/Andrea/Pictures/fun-day.jpg is a path that has 3 directories:
Subdirectory: A directory within another directory. Example: In the path,
Andrea is a subdirectory of
Pictures is a subdirectory of
Home Directory: The topmost level of your user directory; the directory where you begin when you open the terminal. (To view your home directory in the Finder (the graphical user interface on the Mac), click somewhere on the desktop, click on the Go menu at the top of the screen, and select the Home menu option. To get to your home directory in the Terminal, type
cd ~ at the command line prompt.)
For reference, here are all the commands we learned about in this lesson. Feel free to reference this as much as you need! Pretty soon, these will become second-nature:
$ pwd: prints the path to the current working directory to the screen.
$ ls: lists out the directories (folders) and files in the current working directory.
$ ls directory-name: lists out the directories and files in the specified directory.
$ cd directory-name: changes the current directory to the one specified.
$ cd ..: change current directory up one level to the parent directory.
$ cd ~: change the current directory to the home directory (
/Users/Gueston Epicodus computers).
$ mkdir new-directory-name: creates a new directory (folder) in the current working directory unless otherwise specified.
$ touch new-file-name: creates a new, empty file in the current working directory unless otherwise specified.
$ mv file-name new-file-name: moves the contents of the first file into the second file, essentially renaming the file. First file is removed.
$ cp file-name new-file-name: creates an exact copy of the contents of the first file into the second file. Both files exist.
$ rm file-name: deletes the file.
$ rm -r directory-name: deletes the directory and all of the files within it. Be very careful with this command.
$ cat file-name: prints out the contents of the specified file to the screen.
$ cd Desktopchange directory to a directory named Desktop (located inside of the current directory)
$ cd /Users/Guestchange to /Users/Guest directory (which happens to be the home directory on the Epicodus computers)
$ cp Documents/hi.txt .copy the file
hi.txtfrom the Documents directory to whatever directory you are currently working in
$ mv Documents/hi.txt .move the file
hi.txtfrom the Documents directory to whatever directory you are currently working in
Lesson 4 of 10
Last updated March 2, 2021